2 Questions on the Python 881X

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36352
Printed Date: September 10, 2025 at 12:31 AM

Topic: 2 Questions on the Python 881X

Posted By: hrdottawa
Subject: 2 Questions on the Python 881X
Date Posted: July 28, 2004 at 7:32 PM

After help from the forum members I decied on the Python 881X, and my dealer installed it today

in my 2004 Ford Explorer, all's well with the instalation. I have the aux outputs

powering my Rear Window Defoster, Open & Closing the Sunroof & Opening the Rear Hatch.

The things I do not like about the system are:

1) When I open the Rear Hatch (rear window), it does not disarm the Alarm, is there any way I can

permanly disable the Alarm on the Hatch, I open 40 times a day as I use my truck as a service vehicle.

2) The Numeric Keyless Entry system, bulit into the drivers door does not disarm (on open) or rearm (on relock)

the alarm, any way around this?

Thanks for your help.

BrianT, Ottawa, Canada

Replies:

Posted By: extreme1
Date Posted: July 28, 2004 at 9:31 PM

there's no way to make your factory keypad operate the python alarm, there is a setting to disarm alarm on channel 2 activation, I suggest setting the alarm for passive arm so when you close the liftgate it rearms the alarm.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta

Posted By: hrdottawa
Date Posted: July 31, 2004 at 12:04 PM

Thanks extreme 1,

Will give that a try.

BrianT. Ottawa, Canada.