Print Page | Close Window

Connection tidying tips?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36363
Printed Date: September 09, 2025 at 7:32 AM


Topic: Connection tidying tips?

Posted By: mdb_foxmx
Subject: Connection tidying tips?
Date Posted: July 28, 2004 at 9:33 PM

Hey, everyone. This is sort of a non-tech question, but I just finished installing a CrimeGuard 745i4, and I mounted the brain on a removable black panel above the pedals on my 04 civic. Problem is, I have tons of wires down there now, and I don't want them in the way, but I don't know any really good ways to strap them down or pack them together. Any ideas? Thanks.



Replies:

Posted By: eld101
Date Posted: July 28, 2004 at 10:18 PM
zip ties?
electrical tape?



Posted By: auex
Date Posted: July 28, 2004 at 10:47 PM
Bad place to mount the brain.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: mdb_foxmx
Date Posted: July 29, 2004 at 9:20 AM
where is a better place?



Posted By: cezonetheillest
Date Posted: July 29, 2004 at 12:25 PM
i know that i pulled out my glove box in my rx7 and did the install back there.



Posted By: mecpcert_1
Date Posted: July 29, 2004 at 10:40 PM

how about under the radio and extend your wires over...........or if you want to get insane and put the brain behind the cluster and drop your wires downposted_image

the only bad part about that is you'd better hope you don't have to warranty that alarm brain. just some ideas..............good luck!



-------------
do it right the first time....less warranty work=more money!:)


Print Page | Close Window