Print Page | Close Window

88 rx7 remote start 5 speed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36406
Printed Date: May 18, 2024 at 11:02 AM


Topic: 88 rx7 remote start 5 speed

Posted By: cezonetheillest
Subject: 88 rx7 remote start 5 speed
Date Posted: July 29, 2004 at 12:59 PM

hi everyone. i am currently in the process of installing  my remote start on my car. and i want to know if there has to be some kind of relay so i don't have to put the clutch in or anything like that. thanks.



Replies:

Posted By: draasch
Date Posted: July 29, 2004 at 9:28 PM
im not sure if you need the clutch in on that car in order to srat it........if you do, look under the dash and see if you can find the clutch switch, if so how many wires are there....also what is the polarity on the wires??

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt




Posted By: cezonetheillest
Date Posted: July 30, 2004 at 12:41 AM
yeah you have to have the clutch in to start it. also there are two wires that are coming from the swithc. i know the car runs on a negative ground system but i think that the polarity would be negative while the clutch is in and positive with the clutch out. thanks.


Print Page | Close Window