PT cruiser cable entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36415
Printed Date: July 03, 2025 at 12:19 AM

Topic: PT cruiser cable entry

Posted By: naughtydog
Subject: PT cruiser cable entry
Date Posted: July 29, 2004 at 4:19 PM

Can anybody advise of the cable entry point on a pt cruiser. I have to install a novelty siren on one and just wondered how to get into the vehicle from under the hood

Thanks

Nick

Replies:

Posted By: TheSaint421
Date Posted: July 29, 2004 at 7:53 PM

There should be a few holes in the firewall, or if you have to make a new one make sure you use a grommet so the bare metal doesn't cut into the wire.....you do mean getting into the cab of the car from the engine bay correct?

Mark

Posted By: naughtydog
Date Posted: July 30, 2004 at 2:11 AM

yes, getting through the firewall

Nick

Posted By: TheSaint421
Date Posted: July 30, 2004 at 2:13 AM

then there should be a few holes already in the firewall for you to snake a wire through

Mark

Print Page | Close Window