Diode Size

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36423
Printed Date: June 15, 2024 at 2:09 PM

Topic: Diode Size

Posted By: 1v6pony
Subject: Diode Size
Date Posted: July 29, 2004 at 6:28 PM

What size amperage Diode should be used with relays for Alarms...

The examples on this site show 1amp, And another source said to use 6amp.

What is correct??

Replies:

Posted By: 1v6pony
Date Posted: July 29, 2004 at 8:28 PM

OK I do have the install guide and it does not say. So I am safe with useing a 1amp Diode Then???

Posted By: draasch
Date Posted: July 29, 2004 at 8:33 PM

in most cases, yes........if you were pulling say a lawn trailer, then you might need to use a 6 amp to prevent feed back and blowing the parking light wire fuse..........you should be fine with the 1 amp diode.......but when in doubt, ask one of us here!

good luck..

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: 1v6pony
Date Posted: July 29, 2004 at 9:29 PM

Thanks guys for the help, Will be installing it next week. Will Hooler if i need any more advice.

Print Page | Close Window