Hi all!
Love this site!
Mu questions:
Senerio:
I just picked up this vehicle and it had a DEI (Viper) alarm brain already installed, and modified it for use with the stock Ford remote. Its automatic and has power windows.
1. I have a module (AU-93) for the wondow rollup. I would like to put it to use on this alarm :). I noticed that according to the schematic on this vehicle, the wiring location is in the driver foot well. Umm, where exactly is that under the driver's dash? Please make my expierence easier, what colors do I connect?
2. I have a Your Valet (Model 551T) auto starter. I would like information on this unit, (installing it with the color wires) I dont have any info on the wireing color of this. I have two set of wiring coming out of the unit, though Im clueless. (The car is automatic)
Can I use the auto atarter on the existing modified Ford remote to start the vehicle? If so, how?
Are Any relays required for any of my applications?
Thanks a-lot!
Window Up D\ RED / YEL P\ WHT/YEL D\ GRY/ORG P\ YEL/BLK @ MAIN #211
Window Down F/ TAN/BLU F/ TAN/BLU R/ YEL/BLU R/ RED / BLK SWITCH
https://wiringinstructions.com/211.htm-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
drivers footwell = drivers footwell.
its where your feet go. my bet, its to the left, where all of the wiring is (aka DKP, drivers kick panel).
-------------
MECP certified installer