2004 Nissan Titan remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36622
Printed Date: July 22, 2025 at 2:02 AM

Topic: 2004 Nissan Titan remote start

Posted By: tiburon337
Subject: 2004 Nissan Titan remote start
Date Posted: August 02, 2004 at 1:11 PM

Need to install remote start. Am i going to need any special module such as 555U or 555F for the Ford to bypass any type of key device? Installed alarm about 2 months ago, and customer wants remote start now. Will this be a headache or will it be pretty easy? Thanks in advance!!!!!!!

Replies:

Posted By: SoCalBluetooth
Date Posted: August 12, 2004 at 9:15 PM

I used a 556U on my titan and used the loop antenna that came with it. No need to cut any wires but you will need a spare key to place into the 556U module. Also if your customer will want to get another key to replace the one he's giving up you should have him get the extra key before installing the remote start. The dealer will require all key to program a new one so if you install first you will just have to turn around and take the key back out of the 556U to get more spares programmed.

Posted By: Velocity Motors
Date Posted: August 12, 2004 at 10:33 PM

You mat be able to use the PKU-F2 for this vehicle. I'll check it out for you.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Installerny99
Date Posted: August 12, 2004 at 10:40 PM

the ignition wires are a little tough to get to , i found its eaisr to take the cluster out and catch the ignition wires up top , but the panels scratch really easy on this car so becareful.556u or 555u work great.

goodluck

-------------
InstallerNY99

Print Page | Close Window