1995 Ford Explorer Factory Alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36719
Printed Date: July 15, 2025 at 5:45 AM
Topic: 1995 Ford Explorer Factory Alarm
Posted By: Andrews2186
Subject: 1995 Ford Explorer Factory Alarm
Date Posted: August 03, 2004 at 6:31 PM
Does anyone have the factory alarm wiring diagram?? I wanna hook my factory alarm up with my autopage i just installed
Replies:
Posted By: draasch
Date Posted: August 03, 2004 at 10:06 PM
OEM Alarm Arm N/A
OEM Alarm Disarm D GREEN/ PURPLE (-) IN ROUND 55 PIN CONN IN DRIVER KICK
------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: spokman
Date Posted: August 05, 2004 at 12:56 AM
What do you want to know? I"m pretty good with that year. : ) Finishing up an alarm install in my 95 Explorer Limited. You can buy a factory manual on CD online from Ebay. There is also a guy selling them to but I can't remember the link. Can't really send you the diagram you want either. The screen capture part of it scrambles it like that guy in that movie TimeLine.
Posted By: Andrews2186
Date Posted: August 10, 2004 at 11:47 AM
If i hookup my autopage wire to that factory disarm will that do everything that my factory does? i mean will that unlock my doors and lock them???
Posted By: spokman
Date Posted: August 10, 2004 at 7:11 PM
The factory disarm wire will only disarm the factory alarm. Nothing less, nothing more. What I did was use the - open with two diodes to open the door locks and disarm the factory. The door unlock wire is Pink/Green. The lock wire is Pink / YELLOW. Both need to be shown a negative as well as the factory disarm. Point the stripe on the diode towards the alarm. If you have a factory disarm wire disregard the diode setup. Let me know if this helps.
Posted By: spokman
Date Posted: August 10, 2004 at 7:12 PM
The factory disarm wire will only disarm the factory alarm. Nothing less, nothing more. What I did was use the - open with two diodes to open the door locks and disarm the factory. The door unlock wire is Pink/Green. The lock wire is Pink / YELLOW. Both need to be shown a negative as well as the factory disarm. Point the stripe on the diode towards the alarm. If you have a factory disarm wire disregard the diode setup. Let me know if this helps.
|