Print Page | Close Window

Clifford Matrix 2.5x and DEI 551T Remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36726
Printed Date: July 15, 2025 at 8:09 AM


Topic: Clifford Matrix 2.5x and DEI 551T Remote

Posted By: djpc80
Subject: Clifford Matrix 2.5x and DEI 551T Remote
Date Posted: August 03, 2004 at 7:13 PM

Anyone ever install an 551T Remote starter module with the new 2.5x matrix alarms yet? Anything i need to look out for? and is there a way to setup the module when you click channel 3 operation for the remote start to engage , a way to disarm the 2.5x? I have the alarm on auto arm also,any tips or suggestions is much appreciated. Thanks and good luck!



Replies:

Posted By: kgerry
Date Posted: August 04, 2004 at 11:42 AM
WHY NOT JUST PUT IN THE RSX 3.5?

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979



Posted By: djpc80
Date Posted: August 04, 2004 at 6:43 PM
Doh, nice reply. I know about the rsx 3.5 but already bought and installed the 2.5x and got a brand new 551T for 11$ ,just asking for some tips. Thanks tho =P


Print Page | Close Window