Replacing single stage, with dual stage..

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36960
Printed Date: June 19, 2025 at 3:56 PM

Topic: Replacing single stage, with dual stage..

Posted By: TheBayArea
Subject: Replacing single stage, with dual stage..
Date Posted: August 07, 2004 at 5:18 PM

Can anyone help me out with changing my single stage shock sensor, to a dual stage shock sensor? My alarm has an input for a single stage shock sensor with only 3 pins. When I bought the alarm, the person didnt tell me that he broke the shock sensor, and he wouldnt be able to provide me with one. I do however have a dual stage shock sensor from another alarm that I want to use.

Does anyone know how I can find out which pin from the alarm does what? Is there a way for me to find out from the shock sensor, which wire is which? The shock sensor is from a Crimestopper alarm, with 4 pins: Red, black, blue, and white.

Let me know if you need more info. Thanks ahead of time!

Replies:

Posted By: draasch
Date Posted: August 07, 2004 at 5:44 PM

the white is (i beleive the first stage). you will not need that wire....you will only need the red,black and blue.....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: TheBayArea
Date Posted: August 07, 2004 at 6:51 PM

So which wires go where to the alarm?

Posted By: draasch
Date Posted: August 07, 2004 at 7:10 PM

the blue on the shock will go to the neg trigger wire....ie hood/trunk

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt