Opinion’s With alarm Idea

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36992
Printed Date: June 18, 2025 at 3:45 AM

Topic: Opinion’s With alarm Idea

Posted By: Luvs2Race
Subject: Opinion’s With alarm Idea
Date Posted: August 08, 2004 at 12:37 AM

Hey I was just wondering when I get my alarm can I hook up the Aux outputs to my bags?? So say i push the Trunk open button it raises or drops the whole truck. And when I arm it the truck drops and when i dis-arm it the truck rises??

1. For the truck to drop/raise with the aux outputs i can just put a relay and hook it up to all the valves. But the problem is do you think they pulse sent by the alarm will be long enough?

2. Do u guys have ne ideas to make the truck drop when the alarm is armed and to raise when the truck is dis-armed?

Lemme hear some ideas. Thanks.

Replies:

Posted By: Luvs2Race
Date Posted: August 08, 2004 at 12:38 AM

Oh btw it takes the truck a little less than a second to raise/drop

Posted By: auex
Date Posted: August 08, 2004 at 2:07 AM

Need to know what type of alarm. I have done it before on fast valves.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: kronik66
Date Posted: August 08, 2004 at 3:37 AM

you can also use a capacitor and a resistor to adjust the timing of the relay pack. look in the relay section off this site it will tell you how to change pulsed to constant and how to time your relays.

-------------
";P

Posted By: Luvs2Race
Date Posted: August 08, 2004 at 1:36 PM

I was thinking of getting a compustar pager alarm.

Posted By: Luvs2Race
Date Posted: August 08, 2004 at 2:30 PM

Maybe Someting Like this will work??

posted_image

Posted By: tcool
Date Posted: August 08, 2004 at 2:30 PM

With the Compustar programmer you can time your two auxiliary outputs for pulse, latch or timed between 1- 99 seconds.

-------------
bzzzzttttt

Posted By: Joen
Date Posted: August 10, 2004 at 1:33 AM

check for www.electric-life.com