Avital 3300 lights flashing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37000
Printed Date: June 17, 2025 at 6:17 AM

Topic: Avital 3300 lights flashing

Posted By: The_Cheese
Subject: Avital 3300 lights flashing
Date Posted: August 08, 2004 at 2:41 PM

i just bought a 96 suburban that already has an avital 3300 on it. I've downloaded the user manual for it and have figured out alot of stuff about it but i can't figure out how to make the lights flash and the horn to chirp when i arm or disarm it.

can someone help me with this?

thanks

Replies:

Posted By: draasch
Date Posted: August 08, 2004 at 5:14 PM

you will have to look at the alarm diagram and find the wires that correspond to the items that you are talking about. once you find the wire info look under the dash and see if you can find the wires coming from the alarm and trace them to see where they are hooked up to. they may not even be hooked up. once you do that we will be able to help you...

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: The_Cheese
Date Posted: August 09, 2004 at 8:01 PM

as far as i can tell the white wire is hooked up to the parking lights.

the one thing i cant understand is it wont "chirp" when i arm or disarm it. i know the siren is hooked up cause i can make it sound off with the panic button.

i tried to program it but it wont give me the one chirp to acknowledge the menu that im in.

Print Page | Close Window