Aladdin 2000 unlock/lock problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37012
Printed Date: June 11, 2024 at 10:05 AM

Topic: Aladdin 2000 unlock/lock problem

Posted By: superthug
Subject: Aladdin 2000 unlock/lock problem
Date Posted: August 08, 2004 at 6:48 PM

The alarm won't unlock/lock the actuators. I checked the green (lock) wire coming from the harness and its dead, it won't give any pulse either for lock and unlock. I don't understand...I just stopped working so I sent it for warranty and it still won't work. I checked the green wire right by thr brain so its no connection problem. Did I forget to program or anything?

Replies:

Posted By: draasch
Date Posted: August 08, 2004 at 7:22 PM

how are you checking it??????

which lead of your meter?????

post the wiring info for that part of your alarm...

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: superthug
Date Posted: August 08, 2004 at 10:03 PM

I checked with a positive tester. The alarm works and all but the green wire is just dead. I know when I arm the alarm its supposed to give out a + pulse and - pulse on the blue wire.

Can it also be because of the door input wire. I guess the connection became loose for the pass door and the alarm don't detect when that door is open. Can it be because of that?

Print Page | Close Window