2003 Dodge Dakota Alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37026
Printed Date: May 13, 2024 at 11:14 PM
Topic: 2003 Dodge Dakota Alarm
Posted By: feyo65
Subject: 2003 Dodge Dakota Alarm
Date Posted: August 08, 2004 at 10:55 PM
Im trying to find the wire diagram for a 2003 dodge dakota crew cab.does any one know if the wire diagram for a 2000. is the same for a 2003.thanx
Replies:
Posted By: raydawg357
Date Posted: August 10, 2004 at 7:20 AM
| 
MAKE : DODGE | MODEL : DAKOTA PICKUP | YEAR : 20 |
------------- Do it right the first time
Posted By: feyo65
Date Posted: August 14, 2004 at 12:12 AM
im installing an alarm with auto start on it . .... on the instructions it asks the following "green wire -to air conditioner wire -connect keyhole on wire". the same wire then connects to the #86 of the relay i really dont undrstand the directions. ive done reg alarms( without auto start) but they dont ask to conn to the ac and what up with the"key hole on wire" any help would be appretiated.
Posted By: auex
Date Posted: August 14, 2004 at 1:13 AM
Don't know what the alarm means by that. I would assume that the wire would go to a relay and then will act as an ignition wire output like a second ignition. What brand alarm is it.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: feyo65
Date Posted: August 15, 2004 at 12:35 AM
its a cheap nitro iso9001 yeah those install directions R mest up. the diagram pic shoes the wire going to the air con(it has a pic of a box and air is coming out of it)LOL.
Posted By: feyo65
Date Posted: August 15, 2004 at 12:39 AM
by the way thanx raydawg for the 03 diagrm thats exactlly what i needed. without it id be %$##@ED
Posted By: feyo65
Date Posted: August 19, 2004 at 11:36 PM
im installing a remote start alarm . its a negative door trigger . (negative when door is opened) the problem im having is that for some reason 20 sec after i shut the door it turns negative on its own. the alarm has a feature that the lights flash when the door is open . so when i turn the truck off and dont activate the alarm after 20 sec. the lights start to flash .it gets on my nerves.for some reason when the alarm is activated this switching of polarity does not affect the operation of the alarm. can some one help me figure out why the polarity all of a sudden changes could the dome light delay have something to do with it . and wer else could i get the door trigger from.or maybe bypassing the switch that makes the polarity switch.
Posted By: raydawg357
Date Posted: August 20, 2004 at 10:10 AM
What type of vehicle is it? You may have to diode isolate it.
-------------
Do it right the first time
Posted By: feyo65
Date Posted: August 20, 2004 at 9:54 PM
its in a 2003 dodge dakota i tested the factory vehicle wires with out the diode and it still switches polarity .. i also tested the wires without the diode and it still switched ...... does the size of the diode matter if its to big will it still switch polarity....
|