APS996 Question

I am trying to find out if one of the starter inhibit wires will provide ground only when vehicle is armed manually active. I would like to use the ground for things such as rolling up the windows when armed active with the remote but them not to roll up when it arms passive. will either the orange or the ORANGE / white do this ?

Also does anyone know if channel 5 light blue/green turns on and off by the remote with each press or how it works the install directions diagram says see text but the text doesnt say anything except its a delayed pulse.

Ryanic,

I install alot of prestige alarms and remote starts. Leave the orange wire coming out of the main harness to the relay alone. Let that wire operate that one relay for the starter kill and thats it. There should be a four wire harness that plugs into the brain itsself. It consists of 4 black wires all of them with a different color stripe. These wires give you the extra pulses that you need to operate the relays for applications such as factory alarm disarm, winsows, doorpops, ect.

Thank You i Overlooked that since it was in the remote start section.

Also do you know if channel 5 light blue/green turns on and off by the remote with each press or how it works the install directions diagram says see text but the text doesnt say anything except its a delayed pulse

 That pulse will bypass a factory alarm. This wire should pulse when the remote start feature is operated.