New Install Problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3745
Printed Date: September 08, 2025 at 2:18 AM

Topic: New Install Problem

Posted By: sailor
Subject: New Install Problem
Date Posted: September 18, 2002 at 12:29 AM

I am having a problem with a new install of a Marksman M3 Alarm System on a 2002 Dodge Ram 1500. As soon as the truck is started the check engine light comes on and stays on. Everything else seems normal. Any ideas as to why the check engine light would come on?

Replies:

Posted By: Velocity Motors
Date Posted: September 18, 2002 at 5:35 AM

Your second ignition wires are not being activated properly.

| SECOND IGNITION|red |+ |ignition harness |

This wire need to see 12 vots when the car has remote started.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window