1998 Dodge Ram IGN 2 wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37508
Printed Date: July 13, 2025 at 11:20 PM
Topic: 1998 Dodge Ram IGN 2 wire
Posted By: Foolish
Subject: 1998 Dodge Ram IGN 2 wire
Date Posted: August 16, 2004 at 4:15 PM
I am installing a remote start alarm (code alarm power elite 7600). Have every thing working but the remote start. The IGN 2 wire (black white) does not have voltage in the start position. *Some diagrams say IGN2 is blk/white some say its blk/oranage...either way both drop voltage in the start position. Starting to think the code alarm unit is faulty but I can use the quick leave feature and remove the keys from the vehicle and still have it run. All else is hooked up ie IGN 1, starter, tach, heat/ac, etc.
Replies:
Posted By: extreme1
Date Posted: August 16, 2004 at 5:02 PM
Blakc/White is not needed for remote start, it's accually 2nd Acc and pretty much only powers the Radio and wipers.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
|