Bypassing P.A.T.S
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37626
Printed Date: April 27, 2024 at 1:11 AM
Topic: Bypassing P.A.T.S
Posted By: jeffchilcott
Subject: Bypassing P.A.T.S
Date Posted: August 17, 2004 at 9:29 PM
Ok, here is a new question, I have used the bypass module to add a remote start to a vehicle using the ford P.A.T.S security system. Now I have a customer that wants to add an aftermarket alarm, for the features of a trunk release, keyless entry, shock sensor, ect ect, all the things that come with most alarms, any suggestions? I belive Viper makes an alarm that will work with the pats system but I dont remember, Any help would be great
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Replies:
Posted By: auex
Date Posted: August 17, 2004 at 9:51 PM
Unless you are installing a remote start then pats isn't a concern. Pats is just an immobilizer, not an alarm. Model will help for any other info.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: midnightmike
Date Posted: August 18, 2004 at 1:01 AM
auex is right, the p.a.t.s module is only needed when installing a remote starter, just install the alarm like its not even there
|