Proper way to install Door Lock Actuator?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37627
Printed Date: May 09, 2024 at 7:09 AM

Topic: Proper way to install Door Lock Actuator?

Posted By: newinstaller
Subject: Proper way to install Door Lock Actuator?
Date Posted: August 17, 2004 at 9:37 PM

Hi,

I have done a few door lock actuators. They are not that hard.

Is it a good idea to fuse the actuators?

What I mean is is it ok to put a none fused 12v line from the relay to the 12v source of the alarm ( after the fuse ) ????

Whats the proper way to install lock actuators?

Thanks

Replies:

Posted By: mo12v
Date Posted: August 17, 2004 at 10:21 PM

Fuse it

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: auex
Date Posted: August 17, 2004 at 10:54 PM

So that they work? You must fuse the power supply going into the relays.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window