Print Page | Close Window

95 Legend, Autopage Problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37630
Printed Date: October 31, 2024 at 6:29 PM


Topic: 95 Legend, Autopage Problems

Posted By: jigga225
Subject: 95 Legend, Autopage Problems
Date Posted: August 17, 2004 at 9:50 PM

Hello,
I'm attempting to install the Autopage RD-850LCD. I've installed many alarms before.
The problem I'm having with this one is the LED staying on, even when I unplug all the harnesses, exept the power 5-pin harness.
It won't go into RPM learning mode, or any of the modes where i can program things. And that darn LED never goes off!
I've checked my connections? Could the unit be bad? It is brand new...



Replies:

Posted By: jigga225
Date Posted: August 18, 2004 at 8:28 AM
ok i've determined that it's stuck in Valet mode. Becase of the "Zzzz" on theemote. the constant LED, and the only functions that work are the unlock/parking light flash.

Any suggestions?




Posted By: stamper
Date Posted: August 18, 2004 at 10:34 AM

Look on page 9 or your OPERATION MANUAL for the 850 LCD and it will tell you how to exit valet mode.  If this does not work, call 800-262-2527, ext. 461.  This is Autopage tech support.  Good luck.



-------------
Stamper





Print Page | Close Window