RSX 3.5 remote questions
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37635
Printed Date: April 28, 2024 at 10:16 PM
Topic: RSX 3.5 remote questions
Posted By: lilboi
Subject: RSX 3.5 remote questions
Date Posted: August 17, 2004 at 11:40 PM
I noticed that sometimes, when i lock my car, the lcd display will show Shock sensor 1, several seconds (3-5) after i lock it. What does this mean.
Replies:
Posted By: kkeeni
Date Posted: August 17, 2004 at 11:54 PM
try to wait a couple of seconds after you shut your door, then arm it. its probably still detects the shock sensor from you shuting the door and triggers sensor 1.
Posted By: lilboi
Date Posted: August 18, 2004 at 10:31 PM
any one have this problem? I'm not sure if that's the reason. Maybe i'm wrong, i keep thinking that i'm bypassing it.
Posted By: kkeeni
Date Posted: August 19, 2004 at 1:19 PM
yes i have the same alarm system and mine does the same thing when you arm it right after you shut the door , and some of our customers call with the same problem, it worked for them..
Posted By: kenmci
Date Posted: August 19, 2004 at 1:26 PM
what happens is when you arm the alarm, the alarm checks all of the sensors, doors etc. It then bypasses any zones that are being triggered so that the alarm will arm. If you left the door open it would do the same thing only it would show the door icon instead of sensor 1. There is nothing wrong with the alarm it is simply showing you that the shock sensor was going off when you armed the car, so the shock sensor was bypassed, just hit lock again and it will turn the shock sensor back on.
Posted By: Frys24
Date Posted: August 19, 2004 at 2:36 PM
I have the same thing happen to me with my personal remote. its a crimestoper. after disarming then rearm it shows my shock sensor warning. then i just press arm again and it stops. i think its normal for most 2way pagers.
-------------
Fry's Electronics store #24 Concord, Ca.
Posted By: lilboi
Date Posted: August 19, 2004 at 4:15 PM
Cool. Thanks. I have my sensitivty set on really high. I don't mind for false alarms.
|