viper791xv vibrate and light on remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37806
Printed Date: June 30, 2025 at 6:29 PM
Topic: viper791xv vibrate and light on remote
Posted By: Trikzy
Subject: viper791xv vibrate and light on remote
Date Posted: August 20, 2004 at 12:49 PM
Just wondering how i can program my remote to either vibrate or light up, i know it lights up, don't know about vibrate.
I thought it'd be an option using the 998t but it was not, so just wondering if anyone knew off the top of their head.
Replies:
Posted By: profuse007
Date Posted: August 20, 2004 at 1:08 PM
hold down 4 buttons until the beep.
press lock to toggle through vibrate on/off
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: Trikzy
Date Posted: August 20, 2004 at 1:37 PM
...and unlock to toggle the light on and off...
Thank you.
Posted By: kgerry
Date Posted: August 20, 2004 at 4:10 PM
BTW, programming the illumination on will reduce your battery life by about 50%... i finally quit programming it on after i replaced batteries in my Matrix 3.5
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: blingo
Date Posted: August 20, 2004 at 4:23 PM
i have the viper 791xv and i used the receiver w/o illumination, and w/ illumination, and the batteries lasted about the same length of time, so i see no problem with it, and currently have illumination on. i would like if my pager would beep and vibrate, that would be nice incase im in a loud place i would be able to feel the transmitter paging me, then when i put my keys on the table and goto sleep, i would be able to hear it beep if there is a problem.......
|