2000 Ford Mustang remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37810
Printed Date: September 12, 2025 at 2:52 AM

Topic: 2000 Ford Mustang remote start

Posted By: redzonline
Subject: 2000 Ford Mustang remote start
Date Posted: August 20, 2004 at 2:58 PM

I have a 2k ford mustang and I hooked up the remote start and all it does is keep turning the starter over. Is there anyone who can help? there is no chip on the factory key. any help appreciated

Replies:

Posted By: redzonline
Date Posted: August 20, 2004 at 3:16 PM

I have heard that I need a transponder bypass, anyone?

anyone?

please?

Posted By: snguyen
Date Posted: August 20, 2004 at 3:22 PM

You will need to bypass the Ford PATS passive anti theft systems when remote starting.

thanks,

Shawn

Posted By: redzonline
Date Posted: August 20, 2004 at 3:31 PM

thanks for confirming that is there any way I can get the wire colors out ya? I plan on ordering a bypass kit from Omega. have you used them?

Posted By: snguyen
Date Posted: August 20, 2004 at 6:11 PM

For the bypass try www.bypasskit.com

Posted By: slicksam
Date Posted: August 20, 2004 at 6:14 PM

you need a key to get that car to remote start.

try this....leave the key in the ignition barrell...and press the remote.....it should work....then you will know you need a bypass kit for that car.

if you think it does not need a key.....check your igniton wire and ACC wire, sounds like you have them mixed up

Let me know

Slicksam

Posted By: slicksam
Date Posted: August 20, 2004 at 6:14 PM

you need a key to get that car to remote start.

try this....leave the key in the ignition barrell...and press the remote.....it should work....then you will know you need a bypass kit for that car.

if you think it does not need a key.....check your igniton wire and ACC wire, sounds like you have them mixed up,

Let me know

Slicksam

Print Page | Close Window