Print Page | Close Window

Smartwindows with matrix 3.5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37822
Printed Date: May 17, 2024 at 2:12 AM


Topic: Smartwindows with matrix 3.5

Posted By: twiztedkonceptz
Subject: Smartwindows with matrix 3.5
Date Posted: August 20, 2004 at 8:23 PM

I just picked up the matrix 3.5 and i have installed the alarm before on my si, and a few other cars, but i have never tried installing it with the smartwindows and i have heard that it can be done? the reason why i wanted to use the smartwindows instead of the 530t is because the 530t needs an output off of my alarm and since the alarm only has three (one for the remote start) and the other two i need for my doors because they are shaved it wont work. Does anybody know if this is possible, or am i just screwed???? Any help is appreciated!

Nick




Replies:

Posted By: Drey
Date Posted: August 20, 2004 at 11:43 PM
there is that directed part that takes one output and turns it into 6.... that should be plenty :)



Posted By: twiztedkonceptz
Date Posted: August 20, 2004 at 11:56 PM

do you know what part it is by any chance?

Nick


Print Page | Close Window