Print Page | Close Window

Parking lights on a 2004 jeep grand chero

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37832
Printed Date: May 28, 2024 at 1:35 PM


Topic: Parking lights on a 2004 jeep grand chero

Posted By: lowfat
Subject: Parking lights on a 2004 jeep grand chero
Date Posted: August 21, 2004 at 12:01 AM

Does putting different resistors for the parking lights make a difference?? One person tells me to put a 1300 ohm resistor and another tells to put a 915 ohm resistor for the parking light output for a 2004 jeep grand cherokee




Replies:

Posted By: tbirdman74
Date Posted: August 21, 2004 at 8:22 AM

JEEP, GRAND CHEROKEE, 2004, Parking Lights-

Parking lights require a negative trigger thru a 1300 ohm resistor. There is a rest resistance on the wire, so MUST use a relay to isolate away from the switch.



-------------
If it don't fit, Force it.
If it breaks, You needed a new one anyway!



Posted By: NowYaKnow
Date Posted: August 21, 2004 at 3:13 PM
Either one should work.. On the grand cherokee I always use a 1k resistor with no problems. I have never used a relay on a cherokee for the parking lights.

Mike


Print Page | Close Window