2000 Windstar Keyless Entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3786
Printed Date: May 12, 2025 at 4:54 PM

Topic: 2000 Windstar Keyless Entry

Posted By: ccongo
Subject: 2000 Windstar Keyless Entry
Date Posted: September 19, 2002 at 1:28 AM

Can someone please tell me how power door locks for keyless entry should be wired on a 2000 Ford Windstar? Here's what I think is correct:

Unlock = light GREEN/ YELLOW
lock = light blue/orange

Type B negative system. Does this mean I connect ground across terminals terminals 87 on both relays and +12 volts to terminal 85 on one relay and 86 on the other? This way the relay will toggle ground upon activation?

Any insight is appreciated.

Thanks in advance

-------------
Chris

Replies:

Posted By: Velocity Motors
Date Posted: September 19, 2002 at 4:58 PM

LOCK------------lt blue/orange--------20 pin plug at FEM module
UNLOCK--------lt GREEN/ YELLOW-------20 pin plug at FEM module
The FEM module is located under the drivers side of the dash on the firewall.

The keyless entry should be a (-) output trigger system already so all you have to do is to attach the keyless entry wires directly to the target wires above .

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: ccongo
Date Posted: September 20, 2002 at 1:02 PM

Thanks, your information was very helpful!!

-------------
Chris

Posted By: Velocity Motors
Date Posted: September 20, 2002 at 5:12 PM

No problemo.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window