Transponder colors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37873
Printed Date: May 15, 2024 at 3:50 PM

Topic: Transponder colors

Posted By: evnldr
Subject: Transponder colors
Date Posted: August 22, 2004 at 12:16 AM

I need to know the colors of the wires and the one to cut

Replies:

Posted By: profuse007
Date Posted: August 22, 2004 at 12:27 AM

what model car and bypass unit?

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: evnldr
Date Posted: August 22, 2004 at 12:31 AM

Im making my own bypass unit out of a spair transponder chip and an extra ford transponder antena

-------------

Posted By: evnldr
Date Posted: August 22, 2004 at 12:33 AM

https://home.comcast.net/~evnldr/untitled.JPG

THE PIC

-------------

Posted By: extreme1
Date Posted: August 22, 2004 at 7:40 PM

you cannot do this with fords system as the PATS module is built into the key cylinder.

the easiest thing to do is take your PATS key, wrap 6-8 turns of 22-26awg wire around the top half of the key and leave a 12" pair of pigtails.

Next, make an antenna ring out of 8 turns of 22-26awg wire big enough to go around the key cylinder.

wire a relay

85- 12V
86- ground out while running
30. one of the pigtails from key
87- one of the pigtails from your antenna

join the remaining two pigtails together.

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta