Print Page | Close Window

Intellistart 4

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37884
Printed Date: September 20, 2024 at 7:22 PM


Topic: Intellistart 4

Posted By: CelicaGT
Subject: Intellistart 4
Date Posted: August 22, 2004 at 6:01 AM

I have just wired my Clifford avantguard 4, everything works properly except the intellistart. When I press the button to activate the intellistart, the lights flash three times, the engine starts, runs for 5 seconds and dies. The lights flashing three times apparently means a problem with the ignition wires, but they appear fine. Any suggestions on what might be causing this. Secondly the intellistarts heater/ ac cable has not been attached as there isn't a dedicated output on the ignition barrell (I think). Please help!!

Cheers




Replies:

Posted By: daniel2002p
Date Posted: August 22, 2004 at 10:32 AM

Do you have the car info???



-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!


Print Page | Close Window