96 accord alarm/starter troubles

Hi, forum! OK I have 2 issues that i need help on .I'm installing an alarm/starter combo system ALphaguards AG-65S on my 96 accord. I got the alarm to work correctly except for the remote starter.

1). I followed exactly what the manual guide tells me to, but it doesn't work. Please click link https://www.geocities.com/tieuphithu/i1.jpg to see. Everytime i press the unlock button on the remote for 3 seconds the lights flash but then it makes a really big noise like i'm over ignite by the key (like holding the key on START position after the engine started, it makes that same noise) . Plus, as the intruction said, I have to pull my key out while it on ACC.ON position and egine is still on. How is that possible? I tried, but there's no way to pull the key out. I don't think this option is possible on an ACCORD. Well, I tried to start the egine while it is off completely and armed. The engine did crank but couldn't start (sounds like it needs more cranking time or power). I think the second issue will be related to this problem somehow, I don't understand what the guide is trying to tell me.

2). Please click link https://www.geocities.com/tieuphithu/i2.jpg to see. Well here, I connected the blue wire to the starter already, but not for the brown wires. I got a bit confusion there. I connected one of the brown wires to the YELLOW (ACC) car's ignition harness, and the other one i left it alone. The guide says to only connect the second one to the air conditionner power supply only. Isn't that the YELLOW (ACC power one?). I'm not really sure which ones to which ones. Please any ideas are welcome.... Really appreciate it.... THANKS!