After stereo install, keyless entry not
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37974
Printed Date: May 12, 2025 at 5:40 PM
Topic: After stereo install, keyless entry not
Posted By: maxtron
Subject: After stereo install, keyless entry not
Date Posted: August 23, 2004 at 8:33 PM
Hello, I have just installed a new system in my 96 maxima. At first I had a vrx video display and I decided that was too high risk to leave in. as of now the keyless remote still works. Now I took out that and put in a panasonic mp3 unit. I dont know what happened but now all of a sudden after putting the car back together the stereo worked great but as I got out to lock the door I realized the keyless remote no longer worked. and all attempts to reprogram keyless part failed such as the usual method of continuously inserting the key to get into program mode 7 times within 10 seconds is supposed to cause the hazards to blink and it even doesnt do this. can someone please tell me what might be the problem or where to look in a nissan maxima to find if everything is hooked up.. Thanks in advance.
Replies:
Posted By: draasch
Date Posted: August 23, 2004 at 8:53 PM
check all the fuses to see if any of them are blown..... ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Posted By: kidtransam
Date Posted: August 23, 2004 at 10:12 PM
Yeah, you prob blew a fuse. Or you could have pulled a wire loose. Check every where you ran wire and look for `pressure points`, anywhere there may be tension on another wire. Maybe where you pulled or pushed a harness. If it worked before, you more than likely poped a fuse or just pulled somethin loose.
-------------
With a torch and a big enough hammer...it WILL friggin fit!!
|