2004 Nissan Titan

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37993
Printed Date: July 04, 2025 at 9:08 PM

Topic: 2004 Nissan Titan

Posted By: Lizardking
Subject: 2004 Nissan Titan
Date Posted: August 23, 2004 at 11:24 PM

Okay Installed a Code Alarm model CA-535 remote starter with some security features.. The problem is if I lock my doors with Code Alarm keyfob the horn will sound about every 5minutes or sometimes random. Now if I lock the doors with the factory OEM or use the door switch I don't have any problems.. Of course using the factory keyfob or door switch bypasses the Code Alarm module so I understand that.. But why does the horn beep after using the Code Alarm keyfob? Again the horn beeps three quick beeps about every 5-20minutes....

Replies:

Posted By: dBDevil
Date Posted: August 24, 2004 at 12:41 AM

Did you use the proper factory anti-theft bypass? Also check the factory arm/rearm wiring.

Posted By: Lizardking
Date Posted: August 24, 2004 at 12:51 AM

Only thing used was the key bypass for the chipped key.

Posted By: dBDevil
Date Posted: August 24, 2004 at 7:31 PM

There is a couple wires I believe on that alarm for factory disarm. Mainly you'd use that to disarm the factory alarm so it doesn't go off when you remote start it. I haven't done an alarm on that truck yet, but I'm willing to bet it's a pretty straight forward process. Probably just need a wire on the factory security module. Try and find a Techsoft sheet on it.