I am installing a compustar alarm+starter on a 1994 cavaler Z24 and looking through the wiring diagrams I got from Mitchell on demand, I see two power wires going to the ignition. Looking throught the install manual for the alarm I need to connect a ignition wire and im not sure exactly how to hook this up.
Thx
Tyler
All you need to do is hook up the alarm wires that are labelled on the harness to the respective wires that are on the wire color diagram below :
| 12V|red |+ |ignition harness |
| STARTER|yellow |+ |ignition harness |
| IGNITION|pink |+ |ignition harness |
| ACCESSORY|orange |+ |ignition harness |
| POWER LOCK|lt. blue |+ |drivers kick panel |
| POWER UNLOCK|black |+ |drivers kick panel |
| PARKING LIGHTS +|brown | |headlight switch *1 |
| HEADLIGHTS|yellow or tan |+ |headlight switch |
| DOOR TRIGGER|*2 |- |*2 |
| DOME SUPERVISION|white |- |underdash light |
| TRUNK/HATCH PIN|BLACK/ orange *3 |- |low in the drivers kick |
|TRNK/HTCH RELEASE|brown |+ |release switch |
| TACHOMETER|white or pur/wht | |ECM *4 |
| SPEED SENSE|green |4 |ECM *4 |
| BRAKE WIRE|white |+ |brake light switch |
Notes:
*1 Also found low in the drivers kick panel. *2 Use lt. GREEN/ black for the drivers door and lt. blue for the passengers front door. For the 2 door models, use both wires and diode isolate each. For the 4 door models, see directfax document #1075. *3 Only available on models with a ajar indicator in the instrument cluster. *4 The ECM is behind and above glovebox on passengers side.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA