Good afternoon gentlemen
I am looking for an experienced Clifford installer to install TWO alarms only in my personal vehicles. Located in San Antonio, TX.
Both are Clifford Intelliguard 850. No remote start or pager, but they have shock sensor and proximity sensor. I also have a Piezo siren, battery back up, glass break sensor, and a trunk solenoid to be added to one of the vehicles that does not have a factory trunk release. All parts brand new.
The cars are a 2002 Sequoia (trunk release to be added) and a 2002 Maxima (factory trunk release).
Please e-mail me and let me know how much you would charge for each. If you have "done a few", "your own" or don't have fairly extensive experience, then please don't contact me. I would like for the wires to be soldered and covered with heatshrink. I will supply all parts and materials, you supply labor and tools. I can help, or you can do it on your own. I prefer that you come to my house to do the install, but if you own a legitimate install shop I can bring it to you. Strongly prefer MECP certified installer. Reputable local shops have quoted $250 to $350 for each one, so I am looking to save some money. Please e-mail me at centexbnkr|at|lycos.com
Did you try any of the Best Buys? They carry and install Clifford and DEI alarms
-------------
Do it right the first time
Ray -
I responded to the e-mail you sent. Let me know.....
Shannon
Try Jand Y electronics on Zarzamora on the southside I used to work with them and they are some pretty sharp guys. Tell them Jimbo from La. sent you. Some of the guys will work on the side at their housei
-------------
anything is possible!!!!!!!
Avoid J & Y at all costs, I've fixed too many of their hack jobs. Come by and see me, we will talk in person.
-------------
Do it right the first time