Print Page | Close Window

Brighter LED

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38100
Printed Date: July 17, 2025 at 8:02 PM


Topic: Brighter LED

Posted By: robb420in323
Subject: Brighter LED
Date Posted: August 25, 2004 at 7:00 PM

I noticed that my alarm has a soft red light at night when looking thru the tints.

I also noticed that my old lighters will LED's in them still worked and also are bright.

Does anyone know if this would match up? Even if I could run a few in series to use

the supplied power without blowing a single one..?



-------------
Hunter S. Thompson for sheriff



Replies:

Posted By: Teken
Date Posted: August 25, 2004 at 9:21 PM
You can add in the lighter LED's if you wish to the existing alarm system.

It would be helpful to know the working voltage, and current consumption for a more accurate resistor value, if one is needed.

But those lighter LED's dont consume very much current to start with.

Regards

EVIL Teken . . .




Print Page | Close Window