Print Page | Close Window

98 Sebring Conv. Remote Programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38189
Printed Date: July 13, 2025 at 5:07 AM

Topic: 98 Sebring Conv. Remote Programming

Posted By: TimRich
Subject: 98 Sebring Conv. Remote Programming
Date Posted: August 27, 2004 at 3:08 PM

Does any one have the programming instructions for a 1998 Sebring Convirtible JX? I have found instructions for the Coupe but the 2 cars are different.

Replies:

Posted By: mo12v
Date Posted: August 27, 2004 at 3:53 PM

Factory Keyless Entry should be programmed by Dealer or with DRBIII Scan Tool.

This may work:

Manual Programming Procedure (non scan tool)
1. Connect pin 1 of the 16-way data link connector to chassis ground or to pin 4 of
the 16-way data link connector.
2. Close all doors, turn ignition key to off.
3. Turn ignition key to Accessory.

4. Turn ignition key to off, door locks will cycle once (in programming mode).
5. For each key FOB, press any button 3 times in a row to program code. When
programming is complete, the door locks will cycle once.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: TimRich
Date Posted: August 27, 2004 at 5:59 PM

These instructions of for the coupe only

Print Page | Close Window