96 Nissan 240sx, remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38257
Printed Date: July 21, 2025 at 3:35 AM
Topic: 96 Nissan 240sx, remote start
Posted By: Creature546
Subject: 96 Nissan 240sx, remote start
Date Posted: August 28, 2004 at 10:28 PM
i have a 5 speed....do i just been to ground it or what should i do?
Replies:
Posted By: mrbean01
Date Posted: August 29, 2004 at 3:05 AM
So... 1) What year 240 do you have? 2) Are you trying to install an alarm? 3) Which alarm? 4) Are you talking about the neutral safety switch that came with your alarm or the neutral switch on your car? 5) What are you trying to do with the switch? If you answer these question, THEN maybe we'll know what you're asking, and how to help you.
Posted By: Creature546
Date Posted: August 29, 2004 at 3:10 PM
1996 240sx 5 speed ....i am trying to make the remote start work on it...i have a viper 791xv
Posted By: blackshuck
Date Posted: August 29, 2004 at 3:54 PM
GREEN / WHITE wire going to the clutch switch, that wire has to be grounded for the car to start. The hilarious part about 240sx's, is Canadian M/T models never came with a safety switch.
Posted By: mrbean01
Date Posted: August 29, 2004 at 5:13 PM
If it's the neutral toggle that came with your alarm, you could wire it to the ebrake switch wire, so it won't remote start unless the ebrake is on, or you could try to find the neutral sensor switch on your car, and wire the safety toggle to that. Unfortunately, I have a '89 240, so I don't know the wiring for your generation...
Posted By: Creature546
Date Posted: August 30, 2004 at 2:32 AM
ok so i have a viper 791xv and i am hooking it up to my 240sx....i have it all hooked up and when i hit the start button the car cranks over the 3 times but never gets started and running. i tried changing the crank time but it still didnt work...what else should i try or look at? thanks Seth
Posted By: Velocity Motors
Date Posted: August 30, 2004 at 6:40 AM
Did you hook up both starter wires & if it's the 1995+ 240's you have to isolate the accessory wire ( WHITE ) from the key switch.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Creature546
Date Posted: August 30, 2004 at 11:02 AM
yeah its a 96.....how do i isolate it?
Posted By: Creature546
Date Posted: August 30, 2004 at 11:04 AM
also is it the fat white one or the skinnyer one?
|