97 Honda Civic, Keyless
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38265
Printed Date: May 14, 2024 at 3:48 PM
Topic: 97 Honda Civic, Keyless
Posted By: wulimaster
Subject: 97 Honda Civic, Keyless
Date Posted: August 29, 2004 at 3:04 AM
Heres the story. I got an Alpine SEC-100S Security system installed on my 97 Honda Civic Si, but opted out of getting keyless entry because they wanted 50 extra bucks and I wasn't that lazy. Apparently, now I am. I was looking into doing it myself. I have a 3 wire harness that alpine supplies just for door locking/unlocking. On the install guide it says one should go to the door lock circuit, one to the drivers door unlock circuit, and one to all door unlock circuit. Where, and if not where, how do I find these circuits in my car? Is anyone familiar with honda's inparticular? And is this something I can do myself (I do have prior electrical experience), or should I just leave it to the pro's? Thanks for any help!
Greg
Replies:
Posted By: mo12v
Date Posted: August 29, 2004 at 10:06 AM
| Power Lock | GREEN / WHITE (-) | 16 PIN BLUE CONNECTOR | | Power Unlock | GREEN/ ORANGE (-) | TO LEFT OF FUSE BLOCK |
Negative Pulse ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: wulimaster
Date Posted: August 29, 2004 at 3:14 PM
Thanks it worked perfectly. Now I just gotta get my lights flashing with the alarm, they wanted 50 bucks for that too! lol. GReg
Posted By: mo12v
Date Posted: August 29, 2004 at 3:31 PM
| Parking Lamp | RED / BLACK (+) | 7 PIN GRAY CONN. AT FUSE BLOCK |
------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: deviousjoker
Date Posted: August 30, 2004 at 11:25 AM
of pin 2 or 3 at fuse box
-------------
First Class MECP Installer
Posted By: wulimaster
Date Posted: August 30, 2004 at 11:45 AM
mo12v, where are you getting these wiring instructions? I know this site has wiring information for my car, but it dosent seem to be as detailed as your source. Thanks again for the help!
Posted By: wulimaster
Date Posted: August 30, 2004 at 11:46 AM
also, connecting it to the parking lamp circuit, does that make the headlights and tail lights flash?
Posted By: mo12v
Date Posted: August 30, 2004 at 12:48 PM
Micro,Omega, DEI, and OLD stuff I have done Parking Lites only.
If U want Headlites & Tail lites U will need Relay: | Headlights | RED (+) | AT HEADLIGHT SWITCH |
------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: wulimaster
Date Posted: August 30, 2004 at 3:50 PM
Got a funny story. So I go to install the parking light wire and patch it into the parking light circuit, but it already seems to be connected, they just didn't put a fuse in the holder! So they installed it for free, but basically wanted 50 bucks to stick a fuse in there. Glad I didn't fall for that one! Thanks again guys my alarm now works like a real one should. Greg
|