add aux output to alarm?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38297
Printed Date: July 17, 2025 at 9:15 PM

Topic: add aux output to alarm?

Posted By: bkelley
Subject: add aux output to alarm?
Date Posted: August 29, 2004 at 7:45 PM

Hey guys I was wondering something.

Is there a way I can add aux output to my car alarm?

Or is there a way I can make one output do two different things? For example have it when I hit the button once it will unlock one door but if I hit it again it will unlock another door. I know some alarms will do this but mine does not. Is there a way I cand add this to mine or a aux output?

I have a magicar FAI-300 alarm

Replies:

Posted By: bkelley
Date Posted: August 29, 2004 at 9:48 PM

I have installed it on a 97 f150. I have shaved door handels so driver door is on the unlock button and the pass. door on the trunk release. But I want o be able to use the trunk release for my tail gate. So is there a way to add a aux output to open other door, or make the unlock button be able to open both doors(one at a time)? The alarm has a built in central door lock module.

Posted By: bkelley
Date Posted: August 31, 2004 at 7:04 PM

bump

Posted By: auex
Date Posted: August 31, 2004 at 8:35 PM

Buy an alarm that has more programable options including progressive locks to control the doors. There is nothing you can do that will allow you to unlock the second door with the unlock button if it is not programable through the alarm.

I HATE PEOPLE WHO "BUMP"!!!

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: Teken
Date Posted: September 01, 2004 at 4:46 PM

You could use the relay wiring guide listed in this site to do the very basic of what your asking.

But, you will have to use a toggle switch to *enable / select* that feature each time, or turn it off.

Regards

EVIL Teken . . . .

Print Page | Close Window