wnd module activating when i turn car off

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38357
Printed Date: May 28, 2024 at 2:05 PM

Topic: wnd module activating when i turn car off

Posted By: SilvaStratus
Subject: wnd module activating when i turn car off
Date Posted: August 30, 2004 at 6:58 PM

hey my window module is activating for some reason when i turn the car off and its only supposed to do so when the alarm is armed...it is negatively triggered by the alarm's "Armed output 500mA" which is also connected to the starter kill relay which i think could be the problem

is it possible when i turn the car off signal is being sent back thru the starter kill relay and triggering it like that? because the alarm wouldnt trigger a starter kill when you shut off the car i dont think

so if that is the case, could i use a 1A diode in some manner to prevent that?

thanks

-------------
Drive it like you stole it..

Replies:

Posted By: auex
Date Posted: August 30, 2004 at 7:02 PM

You are supposed to place a diode inbetween the starter kill relay and the alarm, band toward alarm. Then you tag the window module between the alarm and diode.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: SilvaStratus
Date Posted: August 31, 2004 at 5:10 AM

EXACTLY what i figured...thums up to you posted_image

-------------
Drive it like you stole it..