1999 Cooper Sport, Clifford 550 alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38380
Printed Date: July 07, 2025 at 10:44 PM
Topic: 1999 Cooper Sport, Clifford 550 alarm
Posted By: plunkett
Subject: 1999 Cooper Sport, Clifford 550 alarm
Date Posted: August 31, 2004 at 2:04 AM
Hey,
I’ve just bought a Clifford 550 alarm, and I’m fitting it myself. But the only thing I’m unsure of is the factory fitted immobiliser, would I be able to run the factory immobiliser and the Clifford simultaneously? So could I just wire ignition wire and starter wire from the Clifford directory in ?
Lucas 5AS Security ECU Immobilser fitted !
ROVER Mini is 1999 Cooper Sport 1.3mpi
Regards
James
Replies:
Posted By: auex
Date Posted: August 31, 2004 at 9:55 AM
As long as the alarm isn't a remote start type alarm then you shouldn't have any problems integrating it into your car. Everything will work fine.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: plunkett
Date Posted: September 04, 2004 at 4:32 PM
Help Locating Ignition & Starter Wire
Hi peepz, need some help on installing a clifford 550, in ROVER MINI COOPER MPI V-REG (1999)
Done most of the installing but still not very sure what wire is the ignition and start wires, I would be very grateful is anyone had a wiring diagram so I cant tell which wire is which. I do have a multi meter, but it gets very confusing as 2 wires are reading 12v before I turn the key and when I start the car all of those wires all become 12v.
Im also interested in bypassing the other factory immobilizer fitted to this car, how would I go about this.
Any help on installing for this car would be fantastic
|