Compustar 1WFM

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38401
Printed Date: May 19, 2024 at 7:27 AM

Topic: Compustar 1WFM

Posted By: saleen49
Subject: Compustar 1WFM
Date Posted: August 31, 2004 at 1:43 PM

hi all,

new to the forum and have been playing with remote start/alarms for a few years now, i am 3/4's done with installing a Compustar 1WFM on a 1993 ford Mustang and have ran into a dead end, the car was already equipt with a dealer installed alarm/keyless entry, when i removed the old alarm i found 4 wires that each test hot when i hit the door lock/unlock buttons hanging from the drivers side of dash at kick panel, 2 for drivers door, and 2 for passenger door, but can't find any trace of wires leading back to the actuators, also does this require relays? install guides i have read talk of pink wires with strips that just are not there, but the door locks worked fine with the dealer installed alarm,

thanks for any help on this,

Replies:

Posted By: saleen49
Date Posted: September 01, 2004 at 1:15 PM

the four wires are WHITE/ brown and BLACK/ green and are hot when you push lock or unlock, what i need to know is were to look for pink and GREEN/ YELLOW wires that run from right to left door on 1993 mustang?

Posted By: xtremeaudio
Date Posted: September 03, 2004 at 2:24 AM

ALL YOU NEED COMPUSTAR DOOR LOCK RELAY PACK THAT THE MOST EASY WAY FOR YOU THEY COME WITH 5 WIRE 1 WIRE HOOD TO 12VOLT AND 4WIRE HOOD TO 4 WIRE YOU HAVE ON YOUR CAR