Print Page | Close Window

Sliding Van Door actuator

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38445
Printed Date: May 15, 2025 at 5:27 AM


Topic: Sliding Van Door actuator

Posted By: stamper
Subject: Sliding Van Door actuator
Date Posted: September 01, 2004 at 9:53 AM

Sup guys.  I put a remote start and actuator on a 89 Chevy G-20 van diesel last week.  He only wanted the actuator in the driver door.  Now he wants all doors to operate with the alarm.  One problem is the sliding side door.  How will I get this to work.  You cannot run wires, because the door slides from front to back and vice-versa.  I have seen on CJ Jeeps that have the removable doors some type of contacts that hit each other when the doors are closed.  Please advise.

Also, I used a DLS for the actuator.  If I add 3 more actuators, will I need an additional set of relays????



-------------
Stamper



Replies:

Posted By: mo12v
Date Posted: September 01, 2004 at 10:17 AM
I would opt for a complete 4 Door kit or 2 Door kit and use the acuator U put in for the Rear.  You probably can get the Side door Contacts from the same company U get your Door Locks from

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.


Print Page | Close Window