Print Page | Close Window

Viper 791 and type B locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38461
Printed Date: May 16, 2025 at 6:44 PM


Topic: Viper 791 and type B locks

Posted By: johnwgy
Subject: Viper 791 and type B locks
Date Posted: September 01, 2004 at 6:21 PM

I have a 2001 Ford F150 supercrew with factory doorlocks and am installing a viper 791.The Direct wire info sheet refers to this as a negative pulse,type B.The viper installation instructions makes no mention how to wire this system,actually no mention of any doorlocks or if  relays are required?Any help please.



Replies:

Posted By: profuse007
Date Posted: September 01, 2004 at 6:33 PM
type b is (-) trigger. just plug the green to lock and blue to unlock. NO need for extra relay!!!

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).



Posted By: xtremeaudio
Date Posted: September 03, 2004 at 1:50 AM
FROM ALARM 791 GREEN WIRE GO PINK / YELLOW ON THE  CAR FOR LOCK AND BLUE FROM ALARM GO PINK/L GREEN ON THE CAR FOR UNLOCK



Posted By: dBDevil
Date Posted: September 04, 2004 at 12:42 AM
In the driver's kick panel


Print Page | Close Window