Print Page | Close Window

1st time installing an alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38486
Printed Date: May 16, 2024 at 11:52 AM


Topic: 1st time installing an alarm

Posted By: jessejamze
Subject: 1st time installing an alarm
Date Posted: September 02, 2004 at 1:20 AM

This is my first time posting, and installing an alarm. I just need some help on wiring. The first pic is the wiring diagram for the alarm, the second is the window roll up switch, and the third is the proximity sensor. I need to know what wire i should hook the window and prox to on the alarm. Also if i need xtra relays and such. Thanks in advance,

Eric
posted_image

window switch
posted_image

proximity sensor

posted_image

It says pink wire to accessory and orange wire to 500ma activation. What wires would i hook to on the alarm?




Replies:

Posted By: mo12v
Date Posted: September 02, 2004 at 9:08 AM
What Vehicle?

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: redlight831
Date Posted: September 02, 2004 at 12:19 PM

any what type of alarm?




Posted By: Drey
Date Posted: September 02, 2004 at 1:50 PM
personally... i don't know if i would try adding in window mods n stuff on my first alarm install.... they can be fishy sometimes...



Posted By: jessejamze
Date Posted: September 02, 2004 at 2:49 PM
The car is a 2002 chevy s10 xtreme, and the alarm is a Magicar


Print Page | Close Window