2004 Tahoe Gauge Problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38572
Printed Date: July 15, 2025 at 9:12 PM
Topic: 2004 Tahoe Gauge Problem
Posted By: gilsman420
Subject: 2004 Tahoe Gauge Problem
Date Posted: September 04, 2004 at 3:55 AM
I installed a Head Unit, 6 Speakers, 3 Amps, and two subs in a 2004 Chevy Tahoe. Since the truck has Databus II, I needed to use P.A.C.'s C2R-GM24 door chime module. The truck had a Bose system in it. The problem is- When the truck is runnig, and you put it in gear, the gauges go from thier normal position to 0, then back to their normal posions. The truck also reads "check tire monitor". The owner just put 22" rims on it, could that have anything to do with it?
Replies:
Posted By: carguy411
Date Posted: September 04, 2004 at 8:23 AM
you should had usedthe pac os-2bose and the door chime module. both of those are needed.
also for the tire pressure.did he put the tire sensors that were in the stock tires in to the new rims. if the truck doesnt seee the sensors it will triggger the light.
|