Print Page | Close Window

Clifford 3.5RS and Trunk Trigger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38701
Printed Date: May 15, 2025 at 2:42 AM


Topic: Clifford 3.5RS and Trunk Trigger

Posted By: DaRacerz
Subject: Clifford 3.5RS and Trunk Trigger
Date Posted: September 06, 2004 at 9:35 PM

hello,

I've only installed alarms on my cars, so excuse me if this question sounds dumb.

I see this alarm has inputs for Hood Pin, and Door Sensors, but I see absolutely nothing for Trunk Pin detection. How do you guys go upon this limitation? Diode and tap in with the Door Trigger or....? Have I over looked something in the manual?

Thanks in advanced.



Replies:

Posted By: profuse007
Date Posted: September 07, 2004 at 12:19 AM
primary harness, 12pin blue wire

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).





Print Page | Close Window