1998 Infiniti QX4 RS Alarm Install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38715
Printed Date: July 21, 2025 at 10:04 AM
Topic: 1998 Infiniti QX4 RS Alarm Install
Posted By: shadowinfector
Subject: 1998 Infiniti QX4 RS Alarm Install
Date Posted: September 07, 2004 at 12:10 AM
hey im doin an rs/alarm install on a 98 Qx4 and was wondering if anyone has done one before to see if there are any hard to reach wires...and where the distributor or the tach wire would be located in the engine bay...thanx in advance for any replies
Replies:
Posted By: profuse007
Date Posted: September 07, 2004 at 12:17 AM
diagram seems to be very straight forward. youll require to use another relay to power the second starter.
the tach wire should alwyas near or right next to the distributor.
if need a diagrma, click on the link below, on my signature.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: shadowinfector
Date Posted: September 07, 2004 at 10:21 AM
if this infiniti has two starter wires should i use a relay or should i just tap it in with the starter wire coming out of the r/s that is already connected to the first starter wire??
Posted By: kgerry
Date Posted: September 07, 2004 at 5:56 PM
always use a relay to isolate these wires......
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|