door locks but wont unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38762
Printed Date: July 16, 2025 at 9:00 AM

Topic: door locks but wont unlock

Posted By: tee17
Subject: door locks but wont unlock
Date Posted: September 07, 2004 at 8:26 PM

i just installed a bulldog 62i remote start on my 92 lumina. everything is working fine. the only problme that i am having is that the doors will lock when i arm it but it wont unlock when i disarm. did i do somethig wrong or miss a step?

Replies:

Posted By: mo12v
Date Posted: September 07, 2004 at 9:00 PM

Are U sure U have 12 Volt + output to Unlock Wire?

1992 Lumina: + pulse

Power Lock	LIGHT BLUE	DRIVER KICK OR AT RELAYS
Power Unlock	BLACK	IN PASSENGER KICK PANEL

1992 Lumina APV: + pulse

Power Lock	LIGHT BLUE	EITHER KICK PANEL OR AT RELAYS
Power Unlock	BLACK	IN PASSENGER KICK PANEL

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: tee17
Date Posted: September 07, 2004 at 9:21 PM

i used the black wire that was at the drivers kick panel. am i suppose to use the one that is in the passenger kick panel?

Posted By: mo12v
Date Posted: September 08, 2004 at 9:50 AM

NO.....

I usually run 2 wires over to Relays in passenger Kick panel, but U need to check (with meter, I hope) to see if U are getting 12 Volts + from your Unlock wire?? And Check the Car factory wire U hooked in to & see if that has 12 Volts + when U Manually Unlock your doors at the switch.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Print Page | Close Window