slowing trunk pop response

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38835
Printed Date: July 18, 2025 at 3:13 PM

Topic: slowing trunk pop response

Posted By: tee17
Subject: slowing trunk pop response
Date Posted: September 08, 2004 at 10:19 PM

i just installed a bulldog 62i on my 92 lumina. when i hit the button to pop the trunk the trunk pops right open. now dont get me wrong i am excited that it works caue this is my first install. but is there a way i can configure the alarm so that i have to hold the button for 5 seconds or something like that. reason being that my son gets to my keys and i would hate to have my trunk open all night and not know it. also can i add 12 volts to the unlock wire in order to get the door to unlock with disarm. it locks just not unlock.

Replies:

Posted By: raydawg357
Date Posted: September 09, 2004 at 7:53 AM

Power Lock	lt. blue	+	either kick
Power Unlock	black	+	either kick

As far as the trunk pop, check in your alarm manual, you might be able to program it to have a delay.

-------------
Do it right the first time

Posted By: Teken
Date Posted: September 09, 2004 at 6:48 PM

You may also consider *assuming* the alarm is capable of doing so, to program the alarm system so as 2 buttons on the remote control is required to do the task.

That is what I have done to ensure my RS is not turned on / off by accident.

Just another option to consider.

Regards

EVIL Teken . . .