progressive door unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38949
Printed Date: December 14, 2025 at 11:10 AM

Topic: progressive door unlock

Posted By: gcorrea
Subject: progressive door unlock
Date Posted: September 10, 2004 at 9:08 PM

i want to install the progressive door unlock on my 1988 silverado with a viper 350hv reversed polarity, does any one have a diagram? will this also work on shaved door handles, if and when i ever decide to install them. thanks.

-------------
gcorrea

Replies:

Posted By: auex
Date Posted: September 10, 2004 at 9:19 PM

First program the alarm to have progressive unlock. If you are doing shaved door handles then all you have to do is use 2 relays and wire the unlock output 1 relay and have the output to the driver's door, and the WHITE/ blue to the passenger's door. All you would be doing is reversing polarity.

posted_image

If doing this on a vehicle with door handles, then you hook the unlock wire to a relay and five wire the driver's door unlock motor wire, and then hook the WHITE/ blue to the regular unlock circuit.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: gcorrea
Date Posted: September 10, 2004 at 9:39 PM

let me find my owners manual and check how to program the alarm cant remember off the top of my head.

-------------
gcorrea